As part of a program to identify and develop techniques for operating feasible electrogenerative processes (1-3), we describe here electrogenerative bromination in which bromine and an olefin are reacted with the aid of suitable electrodes and electrolyte to give dibromoethane and bromohydrin.(We define "electrogenerative processes" as those in which two or more materials react at electrodes so that favorable thermodynamic factors drive the reaction to give a useful chemical product with the generation of byproduct electricity.)Bromine is reduced at the cathode to bromide ions which are transported through the electrolyte to the anode where they combine with olefin, while electrons are conducted through an external circuit to the cathode.Bromine vapor in a nitrogen gas stream and the olefin are introduced to cathode and anode chambers, respectively.The chambers are bounded by gas-permeable, liquid-impermeable electrodes separated by a free electrolyte phase.In contrast to earlier work on other electrogenerative systems (1-3), a diaphragm was needed to separate catholyte and anolyte.This limited the transport of free bromine, probably as Br3-and Brs-(4-6), which would give some direct chemical halogenation of olefin at the anode.Both electrodes operate at positive potentials relative to the standard hydrogen electrode.The rate of bromination and the potential of the cell are controlled by the electrical resistance of the external circuit.Electrode reactions, based on product analyses, with bromide electrolyte appear to be Cathode Br2 -b 2e---# 2Br-[1] Anode RCH=CHR' -{-2Br---> RCH--CHR' -{-2e-[2]* Electrochemical Society Active Member.