吸附
选择性
碱金属
烟气
石墨
活性炭
化学
无机化学
碳纤维
金属
密度泛函理论
兴奋剂
氧气
化学工程
材料科学
物理化学
有机化学
催化作用
计算化学
复合材料
工程类
复合数
光电子学
作者
Qingchun Li,Wenjun Xu,Xin Liang,Baogen Liu,Qingding Wu,Zheng Zeng,Liqing Li,Xiancheng Ma
出处
期刊:Fuel
[Elsevier BV]
日期:2022-06-22
卷期号:325: 124871-124871
被引量:47
标识
DOI:10.1016/j.fuel.2022.124871
摘要
• The synergistic effects of alkali metal groups and ultramicropore were elucidated. • The CO 2 adsorption capacity of alkali metal doped carbon was calculated. • The intrinsic mechanism of the functional groups to CO 2 uptake was clarified. • Provide theoretical guidance for preparation of adsorbents for CO 2 uptake. Activated carbon is a kind of promising adsorbent for post-combustion CO 2 adsorption and separation. However, due to the physical adsorption properties, the use of the reported activated carbon for CO 2 adsorption capacity and CO 2 /N 2 selectivity presents a huge challenge without deep cooling of flue gas to room temperature or even lower temperature and low CO 2 partial pressure. To solve the above problem, the CO 2 uptake in practical flue gas on M−doped (M = O, N, S and alkali metal) graphite surfaces (GS) with various pore widths (0.35–3 nm) were studied by density functional theory (DFT) and grand canonical Monte Carlo simulation (GCMC). The results show that the doping of oxygen, nitrogen, sulfur groups into graphite surface have no significant increase in CO 2 uptake and CO 2 /N 2 selectivity, while the doping of alkali metal into graphite surface can significantly improve the CO 2 uptake and CO 2 /N 2 selectivity in pores of less than 0.6 nm. Especially GS-Na shows the highest CO 2 uptake and CO 2 /N 2 selectivity, up to 20.7 mmol mL −1 (0.35 nm) and 1040 (0.4 nm), respectively. The above findings emphasize the importance of the combination of pore widths less than 0.6 nm and alkali metal groups in determining the CO 2 uptake. By studying the influence of pore size and functional groups on CO2 adsorption, the internal enhancement mechanisms, including CO2 pore-filling adsorption and electrostatic interaction, are clarified. Meantime, the mechanism of functional groups and pore widths synergistically increasing the CO 2 uptake was revealed. These results would provide theoretical guidance for the design and preparation of carbon-based adsorbents for CO 2 uptake.
科研通智能强力驱动
Strongly Powered by AbleSci AI