Design of the Power of an Electric Lifting Motor for a Single Girder Bridge Crane with a 500 Kg Load Capacity

Abstract An electric hoist could be considered as the most important component of an electric overhead crane. Electric hoists are material handling equipment used for lifting, lowering, and transporting materials and products. They are powered by an electric motor and have a controller to adjust the lifting parameters. Three-phase induction motors are most often used as electric lifting motors for bridge cranes. This paper concerns the design of the power of the electric lifting motor for an electric hoist of the single girder bridge crane with the 500 kg load capacity. It represents the design of the electric lifting motor according to a commonly used scheme for the design of electric motors, from the power at a uniform load to the relative load of the motor. Based on the input data, the necessary motor parameters are calculated using Microsoft Excel. The main parameter is the static power of the motor, the calculated value of which is 0.823 kW. Based on the value of this power, a three-phase induction motor 1.1 kW, MS90-4 is selected. This electric lifting motor is suitable for the above-mentioned bridge crane, as it meets the condition of torque overload.