A Fenton-like method using ZnO doped MIL-88A for degradation of methylene blue dyes

MIL-88A with different sizes was prepared by hydrothermal method by changing the content of ZnO. The samples were characterized by SEM, TEM, XRD, XPS and FT-IR. The synthesized material was used for the removal of methylene blue dye in a Fenton-like reaction, and the optimal reaction conditions were studied through single factor experiments. The experimental results show that when the molar ratio of the amount of ZnO introduced to FeCl3·6H2O is 1 : 1, the obtained materials have better catalytic performance than others. Under the optimal conditions, MIL-88A(Fe1Zn1) has the best catalytic performance for 300 mg L-1 methylene blue. The removal rate can reach 96.15% within 40 minutes.