电解质
聚合物
材料科学
化学工程
快离子导体
电化学
电极
复合材料
化学
工程类
物理化学
作者
Longtao Ma,Shengmei Chen,Xinliang Li,Ao Chen,Binbin Dong,Chunyi Zhi
标识
DOI:10.1002/anie.202011788
摘要
Zn batteries are usually considered as safe aqueous systems that are promising for flexible batteries. On the other hand, any liquids, including water, being encapsulated in a deformable battery may result in problems. Developing completely liquid‐free all‐solid‐state Zn batteries needs high‐quality solid‐state electrolytes (SSEs). Herein, we demonstrate in situ polymerized amorphous solid poly(1,3‐dioxolane) electrolytes, which show high Zn ion conductivity of 19.6 mS cm−1 at room temperature, low interfacial impedance, highly reversible Zn plating/stripping over 1800 h cycles, uniform and dendrite‐free Zn deposition, and non‐dry properties. The in‐plane interdigital‐structure device with the electrolyte completely exposed to the open atmosphere can be operated stably for over 30 days almost without weight loss or electrochemical performance decay. Furthermore, the sandwich‐structure device can normally operate over 40 min under exposure to fire. Meanwhile, the interfacial impedance and the capacity using in situ‐formed solid polymer electrolytes (SPEs) remain almost unchanged after various bending tests, a key criterion for flexible/wearable devices. Our study demonstrates an approach for SSEs that fulfill the requirement of no liquid and mechanical robustness for practical solid‐state Zn batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI