材料科学
微观结构
烧结
复合材料
复合数
碳化硅
抗弯强度
热膨胀
硅
断裂韧性
热导率
碳纤维
冶金
作者
Fu Hua,Wei Zhu,Xu Zhongfeng,Peng Chen,Chunze Yan,Kun Zhou,Yusheng Shi
标识
DOI:10.1016/j.jallcom.2019.04.129
摘要
Carbon fiber reinforced silicon carbide (C f /SiC) composite was fabricated by infiltrating liquid silicon (Si) into the carbon preform, which was built by selective laser sintering (SLS) additive manufacturing process from the phenolic resin coated carbon fiber powder with addition of submicron Si. The effect of Si addition on the microstructures of the laser-sintered green part, carbon preform and derived C f /SiC composite was investigated. The results show that the introduced submicron Si plays an important role in reducing porosity and average pore size of the carbon preform, and contributes to improving the microstructure homogeneity of C f /SiC composite by reducing the size of continuous bulk carbon in the preforms. The maximum density, flexural strength and fracture toughness of the C f /SiC composite are 2.89 ± 0.01 g/cm 3 , 237 ± 9.6 MPa and 3.56 ± 0.24 MPa m 1/2 , respectively. The coefficient of thermal expansion (CTE) of the C f /SiC composite is approximately 5.5 × 10 −6 /K from 25 to 900 °C, and the thermal conductivity is in the range of 74–84 W/m·K at room temperature, while decreases to 35–40 W/m·K at 900 °C. • The introduced submicron Si improves the microstructure homogeneity of the C f /SiC composites. • The mechanism of SiC formation is explained in terms of solution and precipitation. • The CTE and thermal conductivity of the C f /SiC composites from RT to 900 °C are evaluated.
科研通智能强力驱动
Strongly Powered by AbleSci AI