The Influence of the Molecular Weight of Poly(Ethylene Oxide) on the Hydrolytic Degradation and Physical Properties of Polycaprolactone Binary Blends

The use of biodegradable polymers in tissue engineering has been widely researched due to their ability to degrade and release their components in a controlled manner, allowing for the potential regeneration of tissues. Melt blending is a common method for controlling the degradation rate of these polymers, which involves combining these materials in a molten state to create a homogenous mixture with tailored properties. In this study, polycaprolactone (PCL) was melt blended with hydrophilic poly (ethylene oxide) (PEO) of different molecular weights to assess its effect on PCL material performance. Hydrolytic degradation, thermal and viscoelastic properties, and surface hydrophilicity were performed to contrast the properties of the blends. DSC, DMA, and FTIR were performed on selected degraded PCL/PEO specimens following mass loss studies. The results showed that adding PEO to PCL reduced its melt viscosity-torque and melt temperature while increasing its hydrophilicity, optimizing PCL/PEO blend for soft tissue engineering applications and could contribute to the development of more effective and biocompatible materials for soft tissue regeneration.