O3-phase layered oxide cathodes have been considered as the most promising candidates for high-energy Na-ion batteries (SIBs) due to their high reversible specific capacity, yet the detrimental OP2 phase transition with severe c -axis contraction at high operating voltages hampers its power performance. Herein, we design and synthesize a novel high-entropy O3-phase cathodes, Na 1.0 (Ni 0.4 Fe 0.2 Mn 0.4 ) 0.83 Zn 0.06 Cu 0.01 Ti 0.08 Ca 0.02 O 2, with a configurational entropy of 1.53 R . This high-entropy design significantly broadens the Na-ion diffusion channels and effectively mitigates c -axis contraction by stabilizing the lattice structure and suppressing phase transitions, thereby facilitating rapid Na-ion transport throughout the charge/discharge process. Consequently, the as-obtained cathode delivers a high specific capacity of 161.8 mAh g –1 at 0.1 C within 2.0–4.2 V and maintains a capacity of 122.1 mAh g –1 even at 5 C with a twofold improvement. In addition, 80.1% of initial capacity is retained after 100 cycles at 1 C, markedly higher than that of the counterpart (40.0%). These results highlight the critical role of high-entropy design in stabilizing the O3-phase cathodes for high-power SIBs.