Nanotwinned Structure in Copper Affects Lithium Deposition Behavior at Electrolyte-Electrode Interface in Anode-Free Lithium Metal Battery

金属锂 阳极 电解质 铜 材料科学 锂(药物) 电极 电池(电) 沉积(地质) 金属 锂电池 无机化学 冶金 化学 离子 离子键合 医学 古生物学 功率(物理) 物理 有机化学 物理化学 量子力学 沉积物 生物 内分泌学
作者
Hao-Yu Ku,Shang-Tzu Liu,Chun‐Lung Huang,Chi‐Chang Hu
出处
期刊:Meeting abstracts [Institute of Physics]
卷期号:MA2023-02 (5): 878-878
标识
DOI:10.1149/ma2023-025878mtgabs
摘要

Anode-free lithium metal battery (AFLMB) is one of new promising energy storage systems. In contrast to lithium-ion battery, the negative electrode of AFLMB does not contain any active materials, resulting in a two-fold increase in energy density. As a result, the charging mechanism on the negative electrode in AFLMB is based on electrodeposition of lithium, rather than intercalation of lithium ions. Unfortunately, that causes a series of problems, such as lithium dendrite formation, volume expansion, broken SEI and dead lithium accumulation, leading to the low cycling stability of AFLMB. Consequently, interfacial characteristics of the negative electrode (usually copper) play a critical role in determining the morphology of lithium deposits which largely affects the issues mentioned above. Understanding the mechanism of lithium electrodeposition across the electrode-electrolyte interface is crucial to design a better copper electrode for long-cyclability AFLMB. The interfacial characteristics of copper are mainly influenced by crystal phase, surface roughness and defects. While the effects of crystal phase and surface roughness on lithium electrodeposition have been extensively studied, the role of micro-scale defects has been seldom discussed, despite their potential to strongly influence the surface properties of copper. Therefore, this work focuses on elucidating the elementary process about how the defects on copper affect the lithium nucleation and subsequent growth. Specifically, we use (111)-nanotwinned and (111)-preferred orientation copper foils with the same surface roughness to conduct a series of electrochemical measurements. The presence of nanotwin structure can reduce the grain boundary and atomic step density, a type of the defects with high surface energy, on the copper. Before lithium electrodeposition, solvents and anions in an electrolyte adsorb on the electrode-electrolyte interface to form the electric double layer. During this process, the atomic steps with high surface energy on copper can establish strong adsorption with the substance in the electrolyte. The solvents adsorbed on the defects may hinder the reduction of anion. Accordingly, the (111)-nanotwinned Cu foil with fewer defects induces the formation of LiF-rich solid electrolyte interphase (SEI), which is beneficial to the transportation of lithium ions. In cyclic voltammetry test, the (111)-nanotwinned Cu foil exhibits higher reduction current density of the precipitation of LiF (Fig. 1). For lithium electrodeposition, during the initial stage, lithium adatoms tend to adsorb on the defects with high surface energy on the copper surface, where other adatoms accumulate to form stable nucleus. Subsequently, the nucleus on each nucleation sites might have different growth direction and crystal phase, resulting in a lot of independent lithium grains. In other words, compared to the (111)-preferred orientation substrate, the (111)-nanotwinned Cu foil with less nucleation sites provides more space for the nucleus to grow in 2-D direction, which leads to the lower nucleation overpotential (Fig. 2 a). That result also facilitates the formation of larger lithium grains with smaller surface area exposed to the electrolyte (Fig. 3). As shown in Figure 2 (b), quasi-steady state over-potential of Li plating on the (111)-nanotwinned Cu is generally larger than that on the (111)-preferred orientation Cu foil, which has been ascribed to the high local current density on larger lithium grains. The quasi-steady state overpotential of Li plating on the (111)-preferred orientation Cu foil gradually increased with the cycle number, which might be attributable to the relatively unstable SEI and the accumulation of dead lithium with the GCD cycling. Furthermore, the (111)-nanotwinned Cu foil always exhibits a lower quasi-steady state overpotential of lithium stripping in comparison with the (111)-preferred orientation substrate at each cycle, probably resulting from the uniform Li deposit and the special LiF-rich SEI formation due to the nanotwinned structure. In the cycling stability test (Figure 2 c), for the Cu//Li cell using the (111)-nanotwinned Cu foil, the coulombic efficiency was kept being around 90% in this 160-cycle test. However, for the Cu//Li cell using the (111)-preferred orientation Cu foil, the coulombic efficiency is generally lower than that of the cell using the (111)-nanotwinned Cu foil at the cycle number > 15. In addition, the coulombic efficiency starts to obviously decay at the 135th cycle and becomes lower than 5% at the 160th cycle. To sum up, we proposed a mechanism about how the defects affect the reaction at electrode-electrolyte interface. The nanotwinned columnar grains reduces the atomic density on the copper surface, which effectively reduces the formation of lithium dendrite, the accumulation of dead lithium and broken SEI. The (111)-nanotwinned Cu foil is proved to be a superior substrate for lithium deposition and stripping, significantly improving the Li + /Li redox reversibility and cycling stability. Figure 1

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
李健的小迷弟的应助被LL采纳,获得10
1秒前
My_magnum_opus完成签到,获得积分0
1秒前
XZJ完成签到,获得积分10
1秒前
ggg完成签到,获得积分10
1秒前
无花果的应助被Seven采纳,获得10
1秒前
Youdge的应助被远方采纳,获得10
1秒前
波博士完成签到,获得积分10
1秒前
科研通AI6.3的应助被远方采纳,获得30
2秒前
tianxl完成签到,获得积分10
2秒前
甜甜甜发布了新的文献求助10
3秒前
3秒前
4秒前
霡霂发布了新的文献求助10
4秒前
SYX发布了新的文献求助10
4秒前
4秒前
YuZhang完成签到,获得积分10
6秒前
dmdgling发布了新的文献求助10
7秒前
kxn完成签到,获得积分20
8秒前
hhh发布了新的文献求助10
8秒前
俏皮夏菡发布了新的文献求助10
9秒前
科研通AI6.3的应助被beibei采纳,获得10
10秒前
GTY完成签到,获得积分10
11秒前
小二郎的应助被哇啦采纳,获得10
12秒前
13秒前
情怀的应助被科研通管家采纳,获得10
13秒前
领导范儿的应助被科研通管家采纳,获得10
13秒前
13秒前
13秒前
丘比特的应助被科研通管家采纳,获得10
13秒前
852的应助被科研通管家采纳,获得10
13秒前
Orange的应助被科研通管家采纳,获得10
14秒前
14秒前
pluto的应助被科研通管家采纳,获得10
14秒前
Wanquan完成签到,获得积分10
14秒前
在水一方的应助被科研通管家采纳,获得10
14秒前
Firsterchao的应助被科研通管家采纳,获得10
14秒前
14秒前
在水一方的应助被科研通管家采纳,获得10
14秒前
Nucleo完成签到,获得积分10
14秒前
pluto的应助被科研通管家采纳,获得10
14秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8186750
求助须知:如何正确求助?哪些是违规求助? 9575027
关于积分的说明 21839240
捐赠科研通 7784331
什么是DOI,文献DOI怎么找? 3434808
关于科研通互助平台的介绍 2559206
邀请新用户注册赠送积分活动 2481611