聚氨酯
涂层
结冰
材料科学
涡轮机
涡轮叶片
环境科学
复合材料
工程类
机械工程
物理
气象学
作者
Yiting Wang,He Shen,Zheng Sun,Yan Li,Fang Feng
出处
期刊:Coatings
[Multidisciplinary Digital Publishing Institute]
日期:2024-05-19
卷期号:14 (5): 645-645
被引量:8
标识
DOI:10.3390/coatings14050645
摘要
Icing is a common physical phenomenon, and the icing of wind turbine blades can significantly affect the performance of wind turbines. Therefore, researching methods to prevent icing is of great significance, and the coating method of anti-icing is an effective way to delay icing, with advantages such as low energy consumption and easy implementation. In this study, using the coating method as the background, tetradecane phase change microcapsules were prepared, with a melting enthalpy of 90.8 J/g and a crystallization enthalpy of 96.3 J/g, exhibiting good coverage and energy storage efficiency. After mixing tetradecane phase change microcapsules (PCMS) with polyurethane coating (PUR) and coating them on wind turbine blades, after a 5 min icing wind tunnel test, the coating could significantly delay the icing on the blade surface, with the highest anti-icing rate reaching 60.41%. This indicates that the coating has a good anti-icing effect and provides basic research data for exploring new anti-icing methods.
科研通智能强力驱动
Strongly Powered by AbleSci AI