Dynamic Topology Optimization of Constrained Layer Damping Structure Considering Non-Uniform Blast Load

The non-uniform distributed pressure of impact wave is usually simplified into concentrated or uniform load equivalently in the optimization design of constrained layer damping structure. However, for the thin-walled structure, it becomes necessary to regard the load as a non-uniform distribution. In this paper, a topology optimization approach is proposed considering the blast load with non-uniform distribution, aiming to unveil its impact on optimization layouts and dynamic responses. Initially, the smoothed particle hydrodynamics (SPH) algorithm is used to obtain the blast pressure what are extracted and integrated into the optimization model. Subsequently, the relative density is regarded as design variable. The construction of material penalty model and the topology optimization model are based on polynomial interpolation scheme (PIS). The sensitivity of objective function is deduced employing an improved adjoint variable method (AVM) to fit the load forms, and the Newmark-[Formula: see text] method is used to calculate the dynamic response. The optimization criterion (OC) is adopted to update the design variables. Finally, two numerical examples are used to exhibit the validity and accuracy of the presented methodology. The findings indicate that the distributed form, spread velocity, excited position and excited amplitude of the blast load all exert a notable influence on optimization results and dynamic response. These results underscore the valuable engineering application of this research and introduce a fresh perspective to the challenge of topology optimization under the blast case.