Tensile Fracture Toughness of Ceramic Materials: Effects of Dynamic Loading and Elevated Temperatures

材料科学 复合材料 断裂韧性 分离式霍普金森压力棒 陶瓷 极限抗拉强度 断裂(地质) 准静态过程 断裂力学 胡须 动载荷 应变率 量子力学 物理
作者
S. Suresh,Taketomo Nakamura,Yehoshua Yeshurun,K.‐H. Yang,J. Duffy
出处
期刊:Journal of the American Ceramic Society [Wiley]
卷期号:73 (8): 2457-2466 被引量:57
标识
DOI:10.1111/j.1151-2916.1990.tb07613.x
摘要

Experimental methods are presented for the determination of fracture initiation toughness of ceramics and ceramic composites in pure tension under quasi‐static and dynamic loading conditions over a range of temperature spanning 20° to 1300°C. Circumferentially notched and cyclic fatigue precracked rods of a variety of ceramic materials were subjected to quasi‐static tensile fracture (rate of stress intensity factor loading, K 1 ∼ 0.1 MPa ∼ m 1/2 ∼ s −1 ) in an electroservohydraulic test machine and to dynamic tensile fracture ( K 1 ∼ 10 6 MPa ∼ m 1/2 · s −1 ) using a modified tensile Kolsky (split‐Hopkinson) bar. For the quasi‐static and dynamic fracture tests at elevated temperatures, the ceramic specimen was inserted into an air furnace where either friction grips or stress wave loading outside the furnace subjected the specimen to fracture. Dynamic finite‐element analyses of the circumferentially notched cylindrical rod have been conducted to develop the optimum specimen dimensions and test procedures for the measurement of dynamic fracture toughness at ambient and elevated temperature. Experiments conducted on Al 2 O 3 , Si 3 N 4 , and SiC, and an Al 2 O 3 ‐25 vol% SiC whisker composite at room temperature indicate that the dynamic to quasistatic fracture initiation toughness ratio K Id / K Ic is in the range of 1.1 to 1.4. Elevated‐temperature fracture tests for the polycrystalline Al 2 O 3 of 3‐μm average grain size reveal that K Id is only mildly sensitive to temperature over a range of 20° to 1100°C, whereas it suffers a precipitous drop above 1100°C. Over the temperature range 20° to 1300°C, the ratio K Id / K Ic is found to be in the range 1.2 to 1.5. Scanning electron microscopy observations show that failure above 1100°C usually evolves by the nucleation, growth, and coalescence of cavities. The mechanisms of elevated‐temperature quasi‐static and dynamic fracture in polycrystalline Al 2 O 3 are examined and possible causes for the apparently higher dynamic fracture initiation resistance are discussed. The significance and limitations of the proposed experimental techniques are highlighted.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
一色彩羽完成签到 ,获得积分10
1秒前
慕容平安完成签到,获得积分10
2秒前
yzy发布了新的文献求助10
2秒前
lydia完成签到,获得积分10
2秒前
2秒前
zhangxu完成签到,获得积分10
2秒前
Leolr10完成签到,获得积分20
3秒前
热辣卤肉发布了新的文献求助10
4秒前
4秒前
CodeCraft的应助被shan采纳,获得10
5秒前
张伟完成签到,获得积分10
5秒前
完美世界的应助被武淑晴采纳,获得10
6秒前
一口一完成签到,获得积分10
6秒前
6秒前
acadedog完成签到,获得积分10
6秒前
xooo完成签到 ,获得积分10
7秒前
睡不醒发布了新的文献求助10
7秒前
8秒前
8秒前
hxn发布了新的文献求助10
8秒前
fengfeng完成签到 ,获得积分10
9秒前
9秒前
10秒前
哟邮票发布了新的文献求助10
11秒前
Jm完成签到,获得积分10
11秒前
传奇3的应助被温凉采纳,获得10
12秒前
12秒前
雪白冷荷完成签到,获得积分10
13秒前
13秒前
滴迪氐媂完成签到 ,获得积分10
14秒前
十三发布了新的文献求助10
14秒前
Yuan88发布了新的文献求助10
14秒前
科研通AI6.2的应助被tszjw168采纳,获得10
14秒前
14秒前
tt完成签到,获得积分10
15秒前
隐无名完成签到,获得积分10
16秒前
含蓄的小鸽子完成签到,获得积分10
16秒前
fantasy的应助被kunkun采纳,获得10
17秒前
科研完成签到,获得积分10
17秒前
Ava的应助被ffff采纳,获得10
17秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1500
John McDowells Bildungstheorie 800
Analyses de reconnaissances de dettes passées devant les échevins d'Ypres (1249-1291) 600
Handbook of Pharmaceutical Excipients. 9th ed 400
Synthesis, Application and Future Perspectives of Smart Nano-materials - Part 1 400
Breaking the World 300
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8153668
求助须知:如何正确求助?哪些是违规求助? 9550448
关于积分的说明 21698499
捐赠科研通 7742484
什么是DOI,文献DOI怎么找? 3425564
关于科研通互助平台的介绍 2550698
邀请新用户注册赠送积分活动 2469211