材料科学
电解质
聚合物电解质
聚合物
电池(电)
储能
离子电导率
阴极
复合数
化学工程
铁电性
纳米技术
离子键合
能量密度
快离子导体
铁电聚合物
电导率
枝晶(数学)
阳极
离子
锂(药物)
热稳定性
复合材料
开裂
离子液体
导电聚合物
作者
Getachew Mengesha Biressaw,Tien M. Nguyen,San Moon,Do Youb Kim,Dong Wook Kim,Jungdon Suk,Yongku Kang
标识
DOI:10.1021/acsami.5c12414
摘要
All-solid-state Li-metal batteries (ASSLBs) are promising for next-generation energy storage systems owing to their high energy density and intrinsic safety. However, their practical applications are impeded by challenges such as low ionic conductivity, uncontrolled Li-dendrite growth, and interfacial instability. This study presents a scalable strategy to address these limitations by incorporating ferroelectric BaTiO 3 into poly(vinylidene fluoride- co -hexafluoropropylene) (PVDF-HFP) nanowebs. The 3D nanowebs were utilized to prepare composite solid polymer electrolytes (3DCSPEs), which exhibited significantly higher ionic conductivity (8.5 × 10 –4 S cm –1 at 25 °C) and a higher Li-ion transference number (0.78) than a PVDF-HFP-based solid polymer electrolyte (PSPE). The 3DCSPEs effectively regulated Li-ion flux, suppressed dendrite growth, and stabilized interfacial contact. In battery tests, LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NCM811)/3DCSPE/Li cells outperformed conventional NCM811/PSPE/Li cells, exhibiting a higher capacity (143.72 mA h g –1 at 0.1 C) and superior prolonged cycle stability over 600 cycles at 0.2 C at 25 °C. Additionally, 3DCSPE mitigated cathode cracking and enhanced ion transport, demonstrating its potential to advance Li polymer battery technology. This study clarifies the pivotal role of in situ cross-linked ferroelectric 3D nanowebs as a novel approach for addressing the key challenges in ASSLBs, facilitating the development of advanced Li polymer batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI