Large-Emitting-Area Quantum Dot Light-Emitting Diodes Fabricated by an All-Solution Process

Quantum dots (QDs) have attracted a lot of attention over the past decades due to their sharp emission spectrum and color, which can be tuned by changing just the particle size and chromophoric stability. All these advantages of QDs make quantum dot light-emitting diodes (QLEDs) promising candidates for display and light-source applications. This paper demonstrates a large-emitting-area QLED fabricated by a full-solution process. This QLED is composed of indium tin oxide (ITO) as the anode, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT: PSS) as the hole injection layer (HIL), and poly(N,N'-bis-4-butylphenyl-N,N'-bisphenyl)benzidine (poly-TPD) as the hole-transport layer (HTL). The light-emitting layer (EML) is composed of green CdSe/ZnS quantum dots. By applying the ZnO nanoparticles as the electron-injection/transport layer, QLED devices are prepared under a full-solution process. The large-emitting-area QLED exhibits a low turn-on voltage of around 2~3 V, and the International Commission on Illumination (CIE) 1931 coordinate value of the emission spectrum was (0.31, 0.66). The large emitting area and the unique QLED structure of the device make it possible to apply these features to inkjet printing quantum dot light sources and quantum dot display applications.