抛光
腐蚀
镍
材料科学
共晶体系
表面粗糙度
冶金
表面光洁度
极化(电化学)
深共晶溶剂
电解抛光
电化学
分析化学(期刊)
合金
复合材料
化学
电解质
物理化学
电极
色谱法
作者
Yafei Liu,Lishi Wang,Zhigang Lv,Zhixiang Bu,Xinbin Hu
标识
DOI:10.1142/s0218625x23500324
摘要
As a material widely used in aerospace and energy development, the surface quality of nickel and its alloy will need to be improved urgently. Electrochemical polishing, as a surface treatment method, can smoothen the metal surface and improve its corrosion resistance. Strict environmental regulations have given rise to new electrochemical polishing techniques. In this paper, the electrochemical polishing of nickel was carried out using resin particles wetted by deep eutectic solvent (DES) as polishing medium. The surface morphology and roughness of polished nickel were characterized by scanning electron microscopy (SEM) and optical profilometer. In addition, electrochemical polarization curve and electrochemical impedance spectroscopy (EIS) were used to test the corrosion behavior of polished specimens in 3.5[Formula: see text]wt.% NaCl solution. The results show that the surface morphology of polished nickel shows grain boundary characteristics. The surface roughness Ra can be reduced from 0.612[Formula: see text][Formula: see text]m to 0.0913[Formula: see text][Formula: see text]m (under 30[Formula: see text]V voltage polishing 1[Formula: see text]h), and the corrosion current density can be reduced from 27.30[Formula: see text][Formula: see text]A[Formula: see text]cm[Formula: see text] to 12.15[Formula: see text][Formula: see text]A[Formula: see text]cm[Formula: see text]. Pitting potential in the polarization curve indicates that the pits at the grain boundaries are corroded due to the influx of corrosive chloride ions. This polishing method combines the resin with DES which can reduce the production of polishing liquid waste while avoiding the use of harmful acid-base electrolytes and effectively reduce the surface geometry uneven degree, improving the surface corrosion resistance.
科研通智能强力驱动
Strongly Powered by AbleSci AI