铌酸锂
带宽(计算)
多路复用
光调制器
电光调制器
频分复用
时分复用
光电子学
电子工程
电气工程
材料科学
光学
计算机科学
电信
工程类
物理
正交频分复用
相位调制
相位噪声
频道(广播)
作者
Xueting Luo,Zhenqian Gu,Chong Wang,Chao Fan,Zhang Weijia
出处
期刊:Electronics
[Multidisciplinary Digital Publishing Institute]
日期:2024-12-23
卷期号:13 (24): 5054-5054
被引量:4
标识
DOI:10.3390/electronics13245054
摘要
In the face of increasingly complex application scenarios, there is an urgent need for (Radio Frequency Identification) RFID systems that are capable of accurately identifying microwave signals of different frequency bands. Based on the acumen detection characteristics of microwave signals by lithium niobate electro-optic modulators, applying large-bandwidth thin-film lithium niobate electro-optic modulation to RFID systems can achieve efficient operation across multiple frequency bands. This study discusses, in detail, the design, simulation, fabrication, and testing process of the electro-optic modulator to obtain a high-performance, large-bandwidth lithium niobate electro-optic modulator. By using multilayer lithography techniques to prepare thick traveling-wave electrodes, the problem of irregular cross-sections during the fabrication of thick electrodes has been successfully reduced, improving the stability and controllability of the device. Test results show that the insertion loss of the electro-optic modulator is about 6 dB, the extinction ratio is 36.5 dB, the optical waveguide mode field is 1 μm, the full-band characteristic impedance is 50 Ω, the test bandwidth is 50 GHz, and the half-wave voltage is 1.8 V. Compared with existing optimization schemes, this design not only achieves a large bandwidth and a small half-wave voltage, but also proposes a new fabrication process scheme, optimizing the process and resulting in samples with stable performance.
科研通智能强力驱动
Strongly Powered by AbleSci AI