Multilayer Fluorine‐Free MoBTx MBene with Hydrophilic Structural‐Modulating for the Fabrication of a Low‐Resistance and High‐Resolution Humidity Sensor

Abstract 2D transition metal borides (MBenes) with abundant surface terminals hold great promise in molecular sensing applications. However, MBenes from etching with fluorine‐containing reagents present inert ‐fluorine groups on the surface, which hinders their sensing capability. Herein, the multilayer fluorine‐free MoBT x MBene (where T x represents O, OH, and Cl) with hydrophilic structure is prepared by a hydrothermal‐assisted hydrochloric acid etching strategy based on guidance from the first‐principle calculations. Significantly, the fluorine‐free MoBT x ‐based humidity sensor is fabricated and demonstrates low resistance and excellent humidity performance, achieving a response of 90% to 98%RH and a high resolution of 1%RH at room temperature. By combining the experimental results with the first‐principles calculations, the interactions between MoBT x and H 2 O, including the adsorption and intercalation of H 2 O, are understood first in depth. Finally, the portable humidity early warning system for real‐time monitoring and early warning of infant enuresis and back sweating illustrates its potential for humidity sensing applications. This work not only provides guidance for preparation of fluorine‐free MBenes, but also contributes to advancing their exploration in sensing applications.