Detection and Modeling of Unstructured Roads in Forest Areas Based on Visual-2D Lidar Data Fusion

The detection and recognition of unstructured roads in forest environments are critical for smart forestry technology. Forest roads lack effective reference objects and manual signs and have high degrees of nonlinearity and uncertainty, which pose severe challenges to forest engineering vehicles. This research aims to improve the automation and intelligence of forestry engineering and proposes an unstructured road detection and recognition method based on a combination of image processing and 2D lidar detection. This method uses the “improved SEEDS + Support Vector Machine (SVM)” strategy to quickly classify and recognize the road area in the image. Combined with the remapping of 2D lidar point cloud data on the image, the actual navigation requirements of forest unmanned navigation vehicles were fully considered, and road model construction based on the vehicle coordinate system was achieved. The algorithm was transplanted to a self-built intelligent navigation platform to verify its feasibility and effectiveness. The experimental results show that under low-speed conditions, the system can meet the real-time requirements of processing data at an average of 10 frames/s. For the centerline of the road model, the matching error between the image and lidar is no more than 0.119 m. The algorithm can provide effective support for the identification of unstructured roads in forest areas. This technology has important application value for forestry engineering vehicles in autonomous inspection and spraying, nursery stock harvesting, skidding, and transportation.