材料科学
热导率
石墨
复合材料
电磁屏蔽
热传导
导电体
热电效应
热的
数码产品
焦耳加热
抗压强度
热扩散率
热电材料
电阻率和电导率
模数
电导率
电子包装
柔性电子器件
电子设备和系统的热管理
电流密度
散热膏
热障涂层
作者
Junjie Wang,S Zhang,Zhiming Fang,Xuhuan Yan,Chenlu Bao
摘要
ABSTRACT Advanced thermal management materials with high through‐plane thermal conductivity and low density are highly in demand in electronics or energy storage. It is still challenging to produce such materials through an efficient and cost‐effective route. Here, we develop a new strategy to prepare aligned graphite foams (AGFs) from industrial‐grade worm graphite. Water serves as an in situ pore‐forming sacrificial template, and pressure‐induced orientation of graphite flakes creates a highly aligned structure with sufficient through‐plane thermal conduction pathways. Through formulation optimization, the AGF exhibits a high through‐plane thermal conductivity of 65.7 W·m −1 ·K −1 and a compressive modulus of 438 MPa at a low density of 0.61 g·cm −3 . Based on this optimal formulation, tuning the AGF to a density of 0.65 g·cm −3 further compacts the conductive network, resulting in an electrical conductivity of 242.8 S·m −1 and an electromagnetic interference shielding effectiveness of 63.31 dB. Moreover, by encapsulating paraffin into the AGF, the resultant composites achieve a steady‐state temperature of 81.8°C at 1.14 V via Joule heating. As a proof‐of‐concept for solar thermoelectric applications, it successfully powers a 1.5 V device under 3‐sun irradiance. Overall, it provides an efficient and cost‐effective strategy to overcome the trade‐off between low density and high through‐plane thermal conductivity.
科研通智能强力驱动
Strongly Powered by AbleSci AI