甘油
热塑性塑料
化学
乳酸
柠檬酸
化学工程
材料科学
有机化学
高分子化学
热塑性聚氨酯
热塑性弹性体
作者
Edwin A. Murillo,Carlos A. Ararat
标识
DOI:10.1080/25740881.2025.2606324
摘要
Glycerol (Gly) citrate (GC) was synthetized, characterized and used as a compatibilizing and plasticizing agent in thermoplastic starch (TPS)/polylactic acid (PLA) blends. The structural, thermal, rheological, morphological, mechanical, water resistance, and biodegradability of the materials were evaluated. GC exhibited high transparence, low viscosity (η) and excellent biodegradability. The GC contents with respect to those of TPS (60 wt%) and PLA (40 wt%) were varied between 0 (control sample) and 20 wt%. Infrared (IR), proton (1H) and carbon (13C) nuclear magnetic resonance (NMR) analyses confirmed the formation of GC. X-ray Diffraction (XRD) revealed the presence of an EH-type crystalline phase, which was formed during the preparation of TPS/PLA employing GC. GC increased the thermal stability, the glass transition temperature (Tg) (values between 53.53 and 60.42°C), the processability (final torque values between 0.21 and 1.29 Nm), moisture content, (MoC) (values were between 20.28 and 28.85%), and the biodegradability (values were between 22.1 and 46.49%). but reduced η, the crystallinity and tensile modulus and strength. GC acted as a compatibilizing (scanning electron microscopy, (SEM) analysis) showed an increase in interfacial adhesion), and plasticizing agent. Consequently, this study contributed to the development of novel environmentally sustainable compatibilizing and plasticizing agents for TPS/PLA blends.
科研通智能强力驱动
Strongly Powered by AbleSci AI