Computational models for analyzing the in-reactor hehavior of metallic fuel pins under transient conditions in liquid-metal reactors are developed and implemented in the TRAMAC (TRAnsient thermo-Mechanical Analysis Code) for a metal fuel rod under transient operation conditions. Not only the basic models for a fuel rod performance but also some sub-models used for transient condition arc installed in TRAMAC. Among the models, a fission gas release model. which takes the multi-hubble size distribution into account to characterize the lenticular bubble shape and the saturation condition on the grain boundary and the dadding deformation model have been developed based mainly on the existing models in the MAC-SIS code. Finally, dadding strains are calculated from the amount of thermal creep. irradiation creep, and irradiation swelling. The dadding strain model in TRAMAC predicts well the absolute magnitudes and general trends of their predictions compared with those of experimental data. TRAMAC results for the FM-1,2,6 pins are more conservative than experimental data and relatively reasonable than those of FPIN2 code. From the calculation results of TRAMAC, it is apparent that the code is capable of predicting fission gas release. and dadding deformation for LMR metal fuel under transient operation conditions. The results show that in general. the predictions of TRAMAC agree well with the available irradiation data.