Improved interfacial performance of carbon fiber/polyetherimide composites by polyetherimide and modified graphene oxide complex emulsion type sizing agent

In the field of interfacial enhancement of composite, sizing method has attracted extensive attention. In this research, a new complex emulsion type sizing agent containing polyetherimide (PEI) and covalently chemical functionalized graphene oxide (GO) was first proposed to further improve the interfacial adhesion of carbon fiber (CF)/PEI composites, adapt to the high processing temperature, and overcome the shortcomings of the solution type sizing agent. The emulsion was prepared by the emulsion/solvent evaporation method. In order to avoid the agglomeration of nanomaterials on CF surface, the monomer and polymer structure of PEI was used to functionalize GO, so as to achieve better compatibility and dispersion of GO in PEI. The physicochemical state of CF surface was characterized and the successful introduction of GO was verified. The microbond test revealed that the introduction of GO further improved the IFSS compared with only PEI sizing. When GO grafted with PEI was used as the main component of the sizing agent, the IFSS reached the largest with an increasement of 55.96%. The mechanism of interfacial reinforcement was proposed. Increased ability of mechanical interlocking, the mutual solubility between PEI molecular chains, and the improvement in wettability may be beneficial to the interfacial strength. This mild and effective modification method provided theoretical guidance for the interfacial enhancement of composites and was expected to be applied in industrial production.