Both numerical simulation and optical experiment were performed to analyze shear strain and stress field of the adhesively bonded region under uniaxial tension.Shear stress evolution was investigated by using adhesive with different thickness.Three-dimensional implicit nonlinear finite element solver Abaqus/Standard was used for modeling the shear stress/strain field of adhesively bonded joints with different adhesive′ thickness.The shear stress distribution in adhesive under axial tensile loading was obtained.In addition,the shear strain field was measured by using digital image correlation(DIC).Results show that the distribution of shear strain and stress in adhesively bonded single-lap joint varies significantly with the adhesive thickness increasing;but once the thickness is beyond a critical value,the influence of adhesive thickness on shear stress and strain becomes quite small.