Silk nanofibrils/chitosan composite fibers with enhanced mechanical properties

Abstract Chitosan (CS) fibers have been applied in various fields due to their biocompatibility, biodegradability, and antibacterial properties. However, weak mechanical properties remain as obstacles to further applications. Silk nanofibrils (SNFs) extracted from natural silk fibroin fibers preserve outstanding mechanical properties at the nanoscale, which are expected to impact structural programming and mechanical reinforcement for CS fibers. In this study, wet‐spun CS/SNFs composite fibers were continuously collected from NaOH/ethanol coagulation. Scanning electron microscope (SEM) results showed that SNFs were uniformly distributed in the CS matrix, and obvious orientation was observed when the mass ratio of SNF/CS was 75/100. Tensile tests showed that the introduction of SNFs significantly enhanced the mechanical properties of CS fibers when the mass ratio of SNF/CS was more than 25/100. With the increasing of SNF content, the tensile strength gradually increased, and the tensile strength and modulus could be increased 2.9 times and 3.5 times, respectively, when 100% SNF was added. The improvement of mechanical properties was partially attributed to hydrogen bonding between SNF filaments and CS, which was confirmed by FTIR and XRD results. This study provides a facile and eco‐friendly method to spin CS fibers with enhanced mechanical properties and a hierarchical structure.