材料科学
碳化钨
泥浆
热喷涂
扫描电子显微镜
压痕硬度
涂层
复合数
表面粗糙度
冶金
脆性
复合材料
能量色散X射线光谱学
微观结构
作者
Harvinder Singh,Manoj Kumar,Ranjan Singh
标识
DOI:10.1142/s0218625x24500501
摘要
In the current investigation, a cold sprayed WC-12Co (WC- Tungsten Carbide, Co- Cobalt) composite coating was deposited on CA6NM steel. Further, microstructural analysis was carried out by using Scanning Electron Microscopy (SEM)/Energy Dispersive Spectroscopy (EDS) and X-Ray Diffraction (XRD) characterization techniques. Mechanical characterization was carried out to measure microhardness, bond strength and surface roughness. The value of coating hardness and surface roughness was measured to be 270 ± 15 Hv and 2.12 ± 0.5 [Formula: see text]m. Thereafter, slurry erosion test was performed under accelerated conditions and performance of coated samples was compared under different parameters such as erodent size, impact velocity, angle of impingement and slurry concentration. WC-12Co coatings show no phase transformation or de-carburization of the WC-Co particles as observed in other thermal spray techniques. The WC-12Co coatings was proved to have beneficial erosion reduction rate as compared to untreated CA6NM steel. The slurry erosion performance of coated samples was improved by 68%. SEM images of degraded coatings show the brittle characteristic of WC-12Co coatings.
科研通智能强力驱动
Strongly Powered by AbleSci AI