电解抛光
磷酸
田口方法
电解质
硫酸
材料科学
正交数组
分析化学(期刊)
冶金
无机化学
化学
色谱法
复合材料
电极
物理化学
作者
Hyun-Kyu Hwang,Seong‐Jong Kim
出处
期刊:Coatings
[Multidisciplinary Digital Publishing Institute]
日期:2023-01-30
卷期号:13 (2): 312-312
被引量:6
标识
DOI:10.3390/coatings13020312
摘要
The purpose of this investigation was to determine the optimal conditions for UNS N08367 electropolishing using the Taguchi method. The investigated factors were the electrolyte composition ratio, applied current density, and electrolyte temperature. Each factor was tested at three levels. Electropolishing was optimized using analysis of variance (ANOVA), signal-to-noise ratio (the smaller the better the characteristics), and surface analysis. The ANOVA results showed that among the three factors, only the electrolyte composition ratio was effective in surface planarization. The optimal conditions for electropolishing determined according to the signal-to-noise ratio were a sulfuric acid-to-phosphoric acid ratio of 2:8, a current density of 400 mA/cm2, and an electrolyte temperature of 75 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI