Laser Depaneling Technology for Medical Device Manufacturing
作者
Jack Gilchrist
标识
DOI:10.37665/mekttdk34576
摘要
ABSTRACT PowerPoint Presentation Only Miniaturized medical electronics require high density, accuracy and clean depanelization technology to eliminate risks from debris and component damage. Laser cutting has been adopted by the industry as a method of routing PCBs in a low-stress manner. Laser cutting has two adverse process outputs that must be minimized: thermal damage near the routed edge and conductive debris generation. As technology continues to miniaturize, the threat of thermal damage to components near the routed edge or risk of shorts on high-voltage devices will increase unless the root causes are understood and minimized. A study was performed using common laser wavelengths to attempt to minimize the adverse effects of laser routing FR4 and polyimide PCBs in relation to critical equipment parameters such as pulse energy, pulse frequency, and movement speed. The resulting thermal effect, or heat affected zone (HAZ), and debris were measured to generate predictive models for these outputs across multiple laser wavelengths. Lasers with wavelengths between 343 nm and 355 nm (UV regime) produced the highest-quality results and are recommended for low-impact PCB laser routing for medical device manufacturing applications.