Analysis on Static Characteristics of a Hybrid Gas Thrust Bearing with Full Porous Compensation and Spiral Grooves Considering Slip and Tilt Effects

机械 压缩性 打滑(空气动力学) 推力轴承 流体静力平衡 材料科学 静压 雷诺方程 质量流量 刚度 方位(导航) 推力 结构工程 非线性系统 流体轴承 体积流量 压力降 准静态过程 多孔性 控制理论(社会学) 雷诺数 流出 流量(数学) 润滑 螺旋(铁路)
作者
Shaowen Zhang,Changlin Fang,Guangyou Shao,Xiaoqiang Liu,Qiliang Wang
出处
期刊:Tribology Transactions [Taylor & Francis]
卷期号:: 1-20
标识
DOI:10.1080/10402004.2026.2757626
摘要

An innovative hybrid gas thrust bearing with full porous compensation and spiral grooves is proposed to improve the static characteristics of the bearing especially operating at high speeds. Considering the effects of velocity slip and bearing tilt, a static model is developed by using the finite volume method and boundary-fitted curvilinear coordinate system for the proposed bearing. The three-dimensional feed flow equation and the nonlinear discretized modified Reynolds equation are solved by the successive over-relaxation and Newton-Raphson schemes, respectively. The static model is validated by comparing with the available theoretical and experimental data for the conventional hydrostatic porous and hydrodynamic spiral-groove gas thrust bearings. The effects of groove, slip and tilt on the static characteristics of the hybrid bearing are investigated under different operating conditions. The calculated result shows that, the hybrid bearing can be superior to the conventional purely hydrostatic type in all static characteristics especially at high compressibility number Λ and low feeding parameter ΛΦ and supply pressure; the load capacity and static stiffness of the former can be up to 11.5 times and 7.4 times, respectively, as much as these of the latter, and the mass flow rate of the former can be only 1/10 of that of the latter. The slip effect on the load capacity and mass flow rate increases with Λ as well as ΛΦ, leading to deviations of less than 9% and 32.1%, respectively; the slip effect is to reduce the static stiffness at relatively low ΛΦ but to increase the static stiffness slightly at higher ΛΦ, resulting in deviations of less than 8.2%. With the increase of tilt ratio, the load capacity and moments increase, but the static stiffness and mass flow rate decrease. As the eccentricity ratio increases, the load capacity increases and the mass flow rate decreases especially at high compressibility numbers; while the variation of the static stiffness is still related to the compressibility number.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
曹广秀完成签到,获得积分10
刚刚
晚随月完成签到 ,获得积分10
刚刚
YYY完成签到,获得积分10
刚刚
1秒前
2秒前
2秒前
2秒前
2秒前
2秒前
SSnCu关注了科研通微信公众号
2秒前
科研通AI6.3的应助被于浩采纳,获得10
2秒前
369ninja发布了新的文献求助10
2秒前
3秒前
3秒前
cici完成签到,获得积分10
3秒前
hj456完成签到,获得积分10
3秒前
西北完成签到 ,获得积分10
3秒前
3秒前
77发布了新的文献求助10
3秒前
我要飞完成签到,获得积分10
4秒前
皆如我愿完成签到,获得积分10
4秒前
4秒前
大个的应助被乌梅不乌采纳,获得10
4秒前
刘丽梅完成签到 ,获得积分0
4秒前
行者完成签到,获得积分10
5秒前
黄jw完成签到 ,获得积分10
5秒前
5秒前
Eris完成签到,获得积分10
5秒前
5秒前
我思故我在完成签到,获得积分0
5秒前
6秒前
雨齐完成签到,获得积分10
6秒前
6秒前
6秒前
ABBYTHU18完成签到,获得积分10
7秒前
战国完成签到 ,获得积分10
7秒前
7秒前
7秒前
小糖完成签到,获得积分10
7秒前
Masweet发布了新的文献求助10
8秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8180531
求助须知:如何正确求助?哪些是违规求助? 9570507
关于积分的说明 21812974
捐赠科研通 7776619
什么是DOI,文献DOI怎么找? 3433286
关于科研通互助平台的介绍 2557539
邀请新用户注册赠送积分活动 2479185