材料科学
阴极
氧气
化学工程
阳离子聚合
法拉第效率
氧化还原
分解
降级(电信)
热稳定性
涂层
工作(物理)
空位缺陷
草酸盐
无机化学
析氧
电化学
热分解
氧气输送
图层(电子)
溶解
化学物理
结构稳定性
作者
Yunxiao Yang,Wentao Yan,Yuyu Ban,Yan Liu,Feng Hai,Weicheng Xue,Qiang Yin,Sen Hou,Wei Tang,Mingtao Li
标识
DOI:10.1021/acsami.6c17205
摘要
Li-rich Mn-based layered oxides (LRMOs) are prospective next-generation cathodes, delivering high specific capacities via coupled cationic and anionic redox. However, sluggish reaction kinetics, irreversible oxygen loss, and progressive interfacial structural degradation limit the practical application of LRMOs. Herein, a coupled strategy for regulating the near-surface structure and interfacial stability is developed using ammonium titanyl oxalate (ATO) as a multifunctional precursor. During thermal treatment, an approximately 10 nm Li2TiO3 coating layer forms to stabilize the cathode interface. Meanwhile, reducing gases released from precursor decomposition induce oxygen vacancy formation, whereas Ti incorporation suppresses excessive transition-metal (TM) reduction in the near-surface region, thereby alleviating the associated increase in Mn3+ content and Jahn-Teller distortion. Moreover, the coupled Ti and oxygen vacancy configuration enhances anionic redox reversibility, stabilizes the near-surface oxygen framework, and lowers the Li+ migration barrier, thereby improving Li+ transport and structural stability. The optimized ATO-2% cathode achieves an average initial Coulombic efficiency (ICE) of 90.07% at 0.1 C and a capacity retention of 88.1% after 300 cycles at 1 C. This work establishes a coupled regulation strategy for the oxygen vacancy-modified near-surface structure and interfacial stability, providing a route for optimizing oxygen vacancy engineering in LRMO cathodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI