作者
Yanqun Huang,Huijun Zhang,Xiancheng Cao,Yang Qin,Jun Li,Guanben Du,Yuehong Zhang,Long Yang,Lin Liu
摘要
Abstract Easy-to-handle and dosage-controllable adhesive films are promising alternatives to traditional liquid adhesives, but their practical applications are limited by the trade-off among cohesive strength, interfacial wettability, and water-resistant bonding performance. Herein, a simple yet effective strategy using sodium citrate as a functional mediator was developed to enhance the physicochemical, wetting, and adhesive properties of conventional poly(vinyl alcohol)/chitosan (PC) films for wood bonding. Upon immersion (∼5 s), citrate ions modified the intermolecular interactions and local hydration environment, regulated chain-segment mobility to promote film spreading, and provided reactive sites for hot-pressing, during which a network coupling covalent cross-linking with hydrogen bonding was established. Optimized PC5 films containing 5 wt % chitosan imparted hot water, cold water, and dry bonding strengths of 1.02, 1.28, and 1.81 MPa, respectively, to three-layer poplar plywood under optimal conditions (120 °C, 1.0 MPa, 4 min), far exceeding pure poly(vinyl alcohol) (PVA) films that failed after 63 °C water soaking. This strategy also enabled robust bonding of eucalyptus and multilayer plywood, with five-layer plywood performing best. Moreover, PC5 films exhibited enhanced mechanical properties (73.7 MPa tensile strength; 462.2 MPa Young’s modulus), outperforming PVA and other biobased counterparts, while offering competitive sustainability, bonding performance, and storage stability relative to common commercial adhesives. This facile and energy-efficient approach expands the utility of biodegradable films for eco-friendly wood panel manufacturing.