材料科学
残余应力
巴黎法
裂缝闭合
复合材料
微观结构
张力(地质)
强度因子
残余物
应力集中
裂纹扩展阻力曲线
压力(语言学)
融合
断裂力学
紧凑拉伸试样
疲劳极限
结构工程
裂纹尖端张开位移
冶金
疲劳试验
循环应力
作者
M. Rais A. Taufiq,Peidong He,Anna Maria Paradowska,Bernd Gludovatz,Xiaopeng Li,Jamie Joseph Kruzic
标识
DOI:10.1016/j.addma.2026.105397
摘要
Laser powder bed fusion (LPBF) produces complex thermal gradients during processing, leading to residual stress formation that can affect fatigue performance. When fabricating AlSi10Mg components via LPBF, there are many process parameter combinations that give similar high-density parts; however, little consideration is often given to selecting parameters that minimize residual stresses and their subsequent effects on the fatigue behavior. This study investigated the effects of residual stresses on fatigue crack growth rates in LPBF fabricated AlSi10Mg using two sets of LPBF process parameters known to give high and low residual stresses. Fatigue crack growth experiments were conducted using compact tension samples under a decreasing applied stress intensity factor range at a 0.1 load ratio, measuring both the Paris law and the near-threshold regime. Residual stresses were measured by neutron diffraction, slitting-compliance, and an on-line compliance method during fatigue crack growth. Compressive residual stresses in the center of the “high stress” as-built specimens gave higher levels of crack closure and higher fatigue thresholds compared to both “low stress” as-built and annealed “stress-free” specimens. When fatigue crack growth rates were corrected for crack closure and superimposed residual stresses at the crack tip, the crack growth data largely collapsed onto a single curve. Different levels of crack closure accounted for most of the residual stress and microstructure related differences in the fatigue crack growth properties of as-built and annealed samples in two orientations. The findings of this study provide guidance for selecting LPBF process parameters to achieve low residual stress and low variability in the fatigue performance of as-built LPBF fabricated AlSi10Mg.
科研通智能强力驱动
Strongly Powered by AbleSci AI