结垢
聚偏氟乙烯
膜
超滤(肾)
力谱学
化学
聚丙烯酰胺
化学工程
膜污染
浓差极化
聚合物
色谱法
分析化学(期刊)
分子
高分子化学
有机化学
生物化学
工程类
作者
Guicai Liu,Shuili Yu,Haijun Yang,Jun Hu,Yi Zhang,Bo He,Lei Li,Zhiyuan Liu
标识
DOI:10.1021/acs.est.5b04098
摘要
Polymer (i.e., anionic polyacrylamide (APAM)) fouling of polyvinylidene fluoride (PVDF) ultrafiltration (UF) membranes and its relationships to intermolecular interactions were investigated using atomic force microscopy (AFM). Distinct relations were obtained between the AFM force spectroscopy measurements and calculated fouling resistance over the concentration polarization layer (CPL) and gel layer (GL). The measured maximum adhesion forces (Fad,max) were closely correlated with the CPL resistance (Rp), and the proposed molecular packing property (largely based on the shape of AFM force spectroscopy curve) of the APAM chains was related to the GL resistance (Rg). Calcium ions (Ca(2+)) and sodium ions (Na(+)) caused more severe fouling. In the presence of Ca(2+), the large Rp corresponded to high foulant-foulant Fad,max, resulting in high flux loss. In addition, the Rg with Ca(2+) was minor, but the flux recovery rate after chemical cleaning was the lowest, indicating that Ca(2+) created more challenges in GL cleaning. With Na(+), the fouling behavior was complicated and concentration-dependent. The GL structures with Na(+), which might correspond to the proposed molecular packing states among APAM chains, played essential roles in membrane fouling and GL cleaning.
科研通智能强力驱动
Strongly Powered by AbleSci AI