材料科学
二乙烯基苯
分散性
聚苯乙烯
变形(气象学)
复合材料
断裂(地质)
高分子化学
聚合物
共聚物
苯乙烯
作者
Jianying He,Z. L. Zhang,H. Kristiansen,Keith Redford,Geir Fonnum,G. I. Modahl
出处
期刊:Express Polymer Letters
[Budapest University of Technology and Economics]
日期:2013-01-01
卷期号:7 (4): 365-374
被引量:36
标识
DOI:10.3144/expresspolymlett.2013.33
摘要
This study focuses on the effect of crosslinking density on the mechanical response of polystyrene-co-divinylbenzene (PS-DVB) particles under compression by means of nanoindentation-based flat punch method combined with SEM observation of particle morphologies.The monodisperse PS-DVB particles with about 5 !m in diameter are produced by the Ugelstad activated swelling method and the crosslinking density defined as the weight percentage of activated crosslinker DVB during the preparation process varies from 2.0 to 55.3%.Results show that the particle stress-strain behaviour is independent of the crosslinking density if the strain is less than 10%.With increasing strain level over 10%, a higher crosslinking leads to a stiffer behaviour of the particles.While slightly crosslinked (2.0 and 5.0 wt%) particles undergo plastic deformation with crazing and residual strain, highly crosslinked (21.3, 32.0 and 55.3 wt%) counterparts experience perfectly viscoelastic deformation.The crosslinking density significantly influences the fracture property as well as the failure morphology.Slightly crosslinked particles become permanently deformed after compression, while highly crosslinked ones are entirely fragmented once a critical strain is reached.
科研通智能强力驱动
Strongly Powered by AbleSci AI