The optimization of welding regimes for obtaining corrosion resistant welded constructions

Most of the technological equipment has welded metal structures in its composition, which are strongly affected by the corrosion phenomenon. In order to achieve a reduction of the corrosion phenomenon it is very important that the welded joints are made using optimal parameters of the welding regime. In the research were made 6 different welded specimens, respectively 3 for the welded T-shaped joint and 3 for the cross-welded joint. The welded joints were made of 10 mm thick using S 355JR steel by the MAG welding process and using welding wire G4 Si 1 as an additive. For the 6 specimens were made analyzes of the metallographic structure thus observing what are parameters of the welding regime that allows to obtain the welded joints with high corrosion resistance.