材料科学
微观结构
涂层
高功率脉冲磁控溅射
溅射
溅射沉积
氮化物
化学工程
钛
氢
薄膜
基质(水族馆)
氮化钛
多孔性
图层(电子)
冶金
复合材料
纳米技术
化学
海洋学
有机化学
地质学
工程类
作者
Cecilia Mortalò,Silvia Maria Deambrosis,Francesco Montagner,Valentina Zin,M. Fabrizio,Luca Pasquali,Raffaella Capelli,Monica Montecchi,Enrico Miorin
出处
期刊:Membranes
[Multidisciplinary Digital Publishing Institute]
日期:2021-05-15
卷期号:11 (5): 360-360
被引量:7
标识
DOI:10.3390/membranes11050360
摘要
This scientific work aims to optimize the preparation of titanium nitride coatings for selective H2 separation using the Reactive High Power Impulse Magnetron Sputtering technology (RHiPIMS). Currently, nitride-based thin films are considered promising membranes for hydrogen. The first series of TiNx/Si test samples were developed while changing the reactive gas percentage (N2%) during the process. Obtained coatings were extensively characterized in terms of morphology, composition, and microstructure. A 500 nm thick, dense TiNx coating was then deposited on a porous alumina substrate and widely investigated. Moreover, the as-prepared TiNx films were heat-treated in an atmosphere containing hydrogen in order to prove their chemical and structural stability; which revealed to be promising. This study highlighted how the RHiPIMS method permits fine control of the grown layer’s stoichiometry and microstructure. Moreover, it pointed out the need for a protective layer to prevent surface oxidation of the nitride membrane by air and the necessity to deepen the study of TiNx/alumina interface in order to improve film/substrate adhesion.
科研通智能强力驱动
Strongly Powered by AbleSci AI