试剂
钻石
硅烷
化学工程
材料科学
化学
无机化学
冶金
有机化学
工程类
作者
Toshiki Tsubota,Shintaro Ida,Osamu Hirabayashi,Shoji Nagaoka,Sanpei NAGAYAMA,Masanori Nagata,Yasumichi Matsumoto
出处
期刊:Nippon Seramikkusu Kyōkai gakujutsu rombunshi
[Ceramic Society of Japan]
日期:2002-01-01
卷期号:110 (1286): 904-910
被引量:11
标识
DOI:10.2109/jcersj.110.904
摘要
Diamond surface reforming was carried out using various silane coupling reagents (n-octyltrimethoxysilane, 3-aminopropyltrimethoxysilane, or 3-mercaptopropyltrimethoxysilane). In order to introduce the O-H group, which reacts with the methoxy group in the silane coupling reagents, on the diamond surface, hydrogenated diamond surfaces were treated with mineral acids (H2SO4, H2SO4+HNO3, or aqua regia). The diamond powders treated with H2SO4 or H2SO4+HNO3 were utilized as the diamond substrate for the reaction with the silane coupling reagents. After the treatment with the silane coupling reagents, peaks assigned to the chemical bonds in the silane coupling reagents appeared in the IR spectrum of the diamond powders. Moreover, these peaks remained even after washing 3 times with organic solvents. The oxidized diamond surface was changed from hydrophilic to hydrophobic upon treatment with n-octyltrimethoxysilane. From the results of this study, it was confirmed that the silane coupling reagent is effective for the surface reforming of diamond treated with mineral acid.
科研通智能强力驱动
Strongly Powered by AbleSci AI