Enhancing Workability Through Adjusting Element Content: A Study on the Hot Deformation Behavior of a Modified Titanium Alloy

材料科学 合金 变形(气象学) 钛合金 钛 冶金 复合材料
作者
Ying‐Ying Liu,Qihao Yang,Wan‐Tao Tian,Tao He,Lijie Cui,Xiaofei Liu,Shifeng Liu,Kuaishe Wang
出处
期刊:Advanced Engineering Materials [Wiley]
卷期号:27 (10)
标识
DOI:10.1002/adem.202402364
摘要

A modified near‐α titanium alloy of Ti‐5.2Al‐3.7Sn‐3.6Zr‐0.5Mo‐0.5Si‐0.02C is subjected to hot compression experiment using Gleeble‐3800 at deformation temperatures ( T ) from 940 °C to 1060 °C and strain rates ( ε ) from 0.01 to 1 s −1 . The β‐phase transus temperature of this alloy is decreased about 20 °C, which leads to lower deformation temperature. By fine‐tuning the contents of Al, Sn, Mo, Ta, and C elements, the machinability of alloy is optimized while maintaining its mechanical properties. According to stress–strain curves, an Arrhenius constitutive model for Ti‐5.2Al‐3.7Sn‐3.6Zr‐0.5Mo‐0.5Si‐0.02C alloy is established with a linear correlation coefficient ( R ) of 0.9868. The thermal mechanical processing map of the Ti‐5.2Al‐3.7Sn‐3.6Zr‐0.5Mo‐0.5Si‐0.02C alloy reveals its optimal processing parameters, ranging from 980 to 1010 °C, with a strain rate of 0.01 s − 1 . The instability region of the Ti‐5.2Al‐3.7Sn‐3.6Zr‐0.5Mo‐0.5Si‐0.02C alloy is reduced about 75% compared to that of the Ti60 alloy, and the energy dissipation rates within the processing regions remain at relatively high levels. Combined with the microstructure of the Ti‐5.2Al‐3.7Sn‐3.6Zr‐0.5Mo‐0.5Si‐0.02C alloy, the mechanism of microstructure evolution is discontinuous dynamic recrystallization with a large accumulation of dislocations near the high‐angle grain boundaries, which leads to the nucleation of grains occurred discontinuous dynamic recrystallization.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
啦啦啦啦啦完成签到,获得积分0
刚刚
777发布了新的文献求助10
刚刚
李健的应助被WYL采纳,获得30
1秒前
李En发布了新的文献求助10
1秒前
szj完成签到,获得积分10
1秒前
Miracle发布了新的文献求助10
2秒前
2秒前
3秒前
3秒前
不舍天真完成签到,获得积分10
4秒前
5秒前
YCR关注了科研通微信公众号
5秒前
xiaolizi发布了新的文献求助30
6秒前
隐形曼青的应助被sasakiki采纳,获得10
7秒前
7秒前
8秒前
123dyj发布了新的文献求助10
9秒前
123发布了新的文献求助10
9秒前
9秒前
大神装完成签到,获得积分10
10秒前
duqianxun发布了新的文献求助10
10秒前
10秒前
11秒前
王乐乐发布了新的文献求助30
12秒前
peace完成签到,获得积分10
13秒前
kkk发布了新的文献求助10
13秒前
13秒前
13秒前
13秒前
violet完成签到,获得积分10
13秒前
T1206182639完成签到,获得积分10
14秒前
Jasper的应助被田雪采纳,获得10
14秒前
MingQue完成签到,获得积分0
14秒前
14秒前
热辣卤肉完成签到,获得积分10
15秒前
15秒前
妮妮完成签到,获得积分10
15秒前
侯伟玮发布了新的文献求助10
15秒前
16秒前
在水一方的应助被宋坤采纳,获得10
16秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Agyptische Geschichte der 21.30. Dynastie 510
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
基于界面调控的高效湿气发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8191965
求助须知:如何正确求助?哪些是违规求助? 9578608
关于积分的说明 21860774
捐赠科研通 7791420
什么是DOI,文献DOI怎么找? 3436743
关于科研通互助平台的介绍 2560487
邀请新用户注册赠送积分活动 2483544