Studies of the Properties of New Electrospun Based on PVA-PEG Polymer Systems Electrolytes for Energy Storage Devices

Solid polymer electrolytes (SPEs) have been considerably investigated due to various electrochemical device applications. Most of the SPEs comprise polymer as a host material to provide strength and good mechanical stability and salt that transfers charge carriers to cause conductivity. Nanocomposite solid polymer electrolyte membranes based on poly(vinyl alcohol) (PVA)-poly(ethylene glycol) (PEG) blend complexed with LiClO4 and nanofillers Al2O3 at different weight percent ratios have been obtained by using electrospinning method. The conductivity and structural properties of the different systems have been characterized by using various experimental approaches such as X-ray diffraction (XRD) and Fourier transform infrared FTIR spectroscopy. The ionic conductivity of the systems has been measured by using an LCR meter in a temperature ranging from 298 to 353 K. Maximum ionic conductivity of 1.58 × 10-4 S cm-1 at room temperature has been observed for the system of PVA-PEG-LiClO4-Al2O3 (50-25-15-10) with 15 wt% weight percent of LiClO4 salt in PVA-PEG blend matrix. The ac conductivity report indicates that the ionic conductivity of the PVA-PEG-LiClO4-Al2O3 complex is influenced by the concentration of LiClO4. The effect of temperature on the ionic conductivity of polymer electrolyte complexes has been estimated by changing the temperature ranging from 298 to 353 K. However, the conductivity of the nanofiber polymer electrolyte systems increases with the rise of temperature, and the maximum conductivity of 1.58 × 10-2 S cm-1 has been recorded at 353 K. The temperature-dependent conductivity follows the Arrhenius behavior.