Phase change material microcapsules doped with phosphorus-based flame retardant filled titanium dioxide nanotubes for enhancing the energy storage and temperature regulation performance of buildings

Solar energy is not only a green alternative to fossil energy but also a candidate for future mainstream energy sources. To improve the efficiency and application range of solar energy, we investigated tris (1-chloro-2-propyl) phosphate (TCPP) modified titanium dioxide nanotubes (TNTs) doped phase change material microcapsules (p-t-MPCMs) to enhance the temperature regulation and flame retardancy of epoxy resin (EP) coatings. Transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy determined the successful preparation of p-TNTs and p-t-MPCMs. Moreover, it was confirmed that the p-t-MPCMs had great thermal stability and reliability by the thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The p-t-MPCMs increased residual mass by 12.2 % at 600 ℃ while correcting the initial melting temperature of MPCMs by 1.0 ℃. Based on the principle of oxygen consumption, the heat release rate (HRR) of EP coatings containing the p-t-MPCMs (p-t-MPCM/EP) was reduced from 665.92 kW/m2 to 443.78 kW/m2, resulting in a total heat release reduction (THR) of 17.73 % tested by a conical calorimeter. Then the results of the miniature chamber model demonstrated that p-t-MPCM/EP had outstanding temperature control ability. In summary, the p-t-MPCMs expressed great potential in regulating building temperature timely and improving the fire safety of EP coatings.