菱镁矿
等温过程
煅烧
分解
产量(工程)
碳纤维
化学工程
材料科学
催化作用
化学
流化床
反应速率
活化能
镁
动力学
一氧化碳
无机化学
化学动力学
费托法
分析化学(期刊)
动能
合成气
可逆反应
扫描电子显微镜
作者
Tengyun Liu,Yidong Jiang,Peng Wang,Shiwei Ma,Tao Song
标识
DOI:10.1021/acs.iecr.5c03831
摘要
Magnesite calcination is a crucial step for MgO production, but it releases substantial CO 2 . Direct hydrogenation of magnesite offers a promising route to simultaneously produce MgO and convert carbonate-derived carbon into valuable C 1 products (CO and CH 4 ), thereby reducing CO 2 emissions at the source. In this study, the direct hydrogenation of natural magnesite was systematically investigated in a fluidized-bed reactor under both isothermal and temperature-programmed conditions, aiming to achieve simultaneous MgO production and in situ carbon utilization. The effects of the temperature, H 2 concentration, and heating mode on gas evolution, carbon conversion, and apparent reaction kinetics were comprehensively evaluated. Results reveal that the presence of H 2 markedly lowers the initial decomposition temperature, enhances carbon conversion, and shifts the reaction equilibrium forward through in situ CO 2 consumption, thereby accelerating MgCO 3 decomposition. Elevated temperatures strongly promote MgCO 3 decomposition and increase the CO 2 yield and selectivity, though the CO yield decreases at higher temperatures due to insufficient time for CO 2 conversion via the reverse water–gas shift reaction. In contrast, increasing H 2 concentration enhances CO and CH 4 yields, shifts CO 2 evolution to earlier stages, and shortens the overall reaction time. Isothermal hydrogenation proceeds at a markedly faster rate than temperature-programmed hydrogenation. Kinetic analysis further shows that H 2 reduces the apparent activation energy from 201.96 to 180.53 kJ mol –1, confirming its role in lowering the reaction barrier. X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM)-EDS characterizations verify the complete conversion of MgCO 3 to MgO in a H 2 atmosphere and the formation of significant cracks favorable for mass transfer. These findings provide fundamental insights and practical guidance for developing energy-efficient, low-carbon magnesite processing technologies.
科研通智能强力驱动
Strongly Powered by AbleSci AI