控制理论(社会学)
计算机科学
趋同(经济学)
观察员(物理)
转子(电动)
航程(航空)
职位(财务)
位置传感器
方波
变量(数学)
信号(编程语言)
控制工程
财产(哲学)
可靠性(半导体)
磁铁
控制系统
控制(管理)
工程类
PID控制器
闭环
循环(图论)
作者
Xinran Shi,Chao Gong,Hao Chen,Xing Zhao,Cheng Xue,Yihua Hu
出处
期刊:Proceedings of the ... Annual Conference of the IEEE Industrial Electronics Society
[Institute of Electrical and Electronics Engineers]
日期:2025-10-14
卷期号:: 1-8
标识
DOI:10.1109/iecon58223.2025.11221800
摘要
For the full-speed sensorless control of permanent magnet synchronous motors (PMSM) used in robotic joints, conventional methods adopt a combined strategy of zero-low-speed and medium-high-speed control methods. This requires switching between methods during motor operation, which reduces the reliability and stability, making it unable to be used in robotic joint motors. In this paper, a novel full-speed range sensorless control method is proposed. The method consists of two ranges: the zero-speed and the operation range. In the zero-speed range, a high-frequency square wave injection (HFSI) method with only 20 square-wave pulses (SWPs) is employed, resulting in a short injection duration, which ensures low noise. Leveraging the bidirectional convergence property of the linear time-invariant enhanced phase-locked loop (LTI-EPLL), the initial position and NS polarity can be determined without additional signal injection, ensuring smooth startup and rotor standstill. In the operation range, based on the eletrical properties of the PMSM, a sliding-mode speed observer (SMSO) is constructed to directly estimate the speed, and the position is obtained via integration. Thus, full-speed range operation is achieved without the need to switch between methods during operation range. Finally, the feasibility of this method is validated in MATLAB/Simulink.
科研通智能强力驱动
Strongly Powered by AbleSci AI