电解质
材料科学
离子电导率
电化学窗口
电化学
电池(电)
涂层
化学工程
聚合物
聚合物电解质
复合数
电导率
泄漏(经济)
快离子导体
聚氧化乙烯
氧化物
膜
电极
聚乙烯
纳米技术
纳米颗粒
离子液体
复合材料
相容性(地球化学)
离子键合
纳米复合材料
离子
作者
Xianzheng Liu,Nashrah Hani Jamadon,Lin Zheng,Rongji Tang,Xiangjun Ren
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2025-10-02
卷期号:17 (19): 2673-2673
被引量:5
标识
DOI:10.3390/polym17192673
摘要
Traditional liquid electrolyte batteries face safety concerns such as leakage and flammability, while further optimization has reached a bottleneck. Solid electrolytes are therefore considered a promising solution. Here, a PEO–LiTFSI–LATP (PELT) composite electrolyte was developed by incorporating nanosized Li1.3Al0.3Ti1.7(PO4)3 fillers into a polyethylene oxide matrix, effectively reducing crystallinity, enhancing mechanical robustness, and providing additional Li+ transport channels. The PELT electrolyte exhibited an electrochemical stability window of 4.9 V, an ionic conductivity of 1.2 × 10−4 S·cm−1 at 60 °C, and a Li+ transference number (tLi+) of 0.46, supporting stable Li plating/stripping for over 600 h in symmetric batteries. More importantly, to address poor electrode–electrolyte contact in conventional layered cells, we proposed an integrated electrode–electrolyte architecture by in situ coating the PELT precursor directly onto LiFePO4 cathodes. This design minimized interfacial impedance, improved ion transport, and enhanced electrochemical stability. The integrated PELT/LFP battery retained 74% of its capacity after 200 cycles at 1 A·g−1 and showed superior rate capability compared with sandwich-type batteries. These results highlight that coupling LATP-enhanced polymer electrolytes with an integrated architecture is a promising pathway toward high-safety, high-performance solid-state lithium-ion batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI