Effects of Fracturing Fluids Imbibition on CBM Recovery: In Terms of Methane Desorption and Diffusion

Summary Hydraulic fracturing technology has been widely used to improve the productivity of the coalbed methane (CBM) reservoir, during which tons of fracturing fluids infiltrate the coal seam. However, the effects of fracturing fluids imbibition on CBM recovery are still unclear. In this study, spontaneous and forced water imbibition experiments in methane-bearing low-volatile bituminous (LVB) coal were conducted at various gas adsorption equilibrium pressures, following which methane desorption and diffusion experiments were performed. These experiments simulated the complete process of fracturing fluid imbibition during well shut-in and subsequent methane production upon reopening, which is helpful in understanding the impact of fracturing fluid imbibition on CBM production. The results show that water imbibition displaces adsorbed methane in the coal matrix, and with reservoir pressure increasing, the displaced effect decreases. Furthermore, the forced imbibition (FI) displaces less methane than the spontaneous imbibition (SI) due to water rapidly filling fractures and blocking methane migration out of the matrix in the FI. In the initial stages of gas production following spontaneous or forced water imbibition, the displaced methane diffuses out of the coal at a rapid rate and then slows down. Furthermore, in the case of FI, a significant amount of residual gas remains after desorption and diffusion due to the water blocking effect. However, the water blocking effect has a minimal impact on coal undergoing SI. In terms of desorption and diffusion, this study provides a comprehensive understanding of the effects of fracturing fluids imbibition on recovery of CBM, which is useful for practical shut-in operations following hydraulic fracturing in LVB coal seams.