涂层
材料科学
荫罩
复合材料
过程(计算)
GSM演进的增强数据速率
涡流
电压
体积流量
法拉第笼
工艺优化
横截面
表面处理
热喷涂
计算机模拟
影子(心理学)
机械工程
雕刻
流量(数学)
粉末涂料
光学
电流体力学
涂膜
气流
工程制图
作者
Shuzhen Zhang,Zhendong Mao,Yang Liu,Nian Zhang,Chenxing Ling
标识
DOI:10.25103/jestr.192.15
摘要
When a combined target surface is coated via an electrostatic spray-painting process, the thin paint is deposited in the shadow area, and the excess proceeds to the edge of the sprayed surface due to the Faraday cage effect and air vortex turbulence, resulting in reduced paint transfer efficiency and poor coating uniformity.A spray painting process strategy for groove-shaped targeted surfaces was developed in this study to investigate the process parameter influence on the coating thickness of a combined target surface.A simulation model for the spray painting process on the inner surfaces of U and V-shaped grooves was established using computational fluid dynamics.The electrostatic and gas-liquid two-phase flow fields were computed via the Euler-Lagrange approach.The coefficient of variation (CV) of coating thickness and transfer efficiency (TE) were calculated for different spraying process parameters related to orientation, voltage, and atomization pressure.The simulation results were validated by spraying tests.Results demonstrate that, the combined longitudinal and transverse spraying strategy effectively improves coating uniformity while maintaining high TE.Moreover, reducing the voltage further increases TE with reduced CV, and increasing the atomization pressure helps decrease CV but leads to a decrease in TE.The proposed combined spraying strategy and process optimization scheme offer a viable solution to mitigate coating non-uniformity and paint overspray in the shadow regions of grooved surfaces.
科研通智能强力驱动
Strongly Powered by AbleSci AI