材料科学
钙钛矿(结构)
带隙
串联
光电子学
能量转换效率
光伏系统
结晶
相(物质)
单层
阳极
纳米技术
混合太阳能电池
化学工程
载流子
太阳能电池
氧化物
钙钛矿太阳能电池
开路电压
作者
Xia Chen,Xiaole Hu,Haowen Sun,Ziyao Wang,Guohua Zhong,Ming Chen,Weimin Li,Chunlei Yang,Jie Zhang
标识
DOI:10.1002/adfm.202529991
摘要
ABSTRACT The salts with amine‐group and self‐assembled monolayers (SAMs) have been commonly used as additives and hole‐selective layers (HTLs) to enhance the performance of wide bandgap (WBG) perovskite solar cells (PSCs), which hold great potential to develop low‐cost tandem photovoltaic technology surpassing the Shockley‐Queisser efficiency limit. In this work, a multifunctional additive, 4‐guanidinobenzoic acid hydrochloride (GBAC), was employed to effectively regulate WBG perovskite film crystallization and suppress phase segregation, resulting in enhanced open‐circuit voltage ( V OC ) and phase stability in PSCs. However, the charge transport in WBG PSCs is affected by the interaction between GBAC and SAM. By modulating the interfacial dipole and energy‐level alignment of SAM modified transparent conductive oxide (TCO) substrates, WBG PSC with a bandgap of 1.66 eV obtained the power conversion efficiency (PCE) of 23.12% with a high fill factor (FF) of 85.64%. Moreover, the device retains 94% of its initial PCE after 600 h of maximum power point tracking under one‐sun illumination at room temperature. Finally, a mechanically stacked perovskite/Cu(In, Ga)Se 2 (CIGS) tandem solar cell attains a PCE of 28.81%. This work provides insight of modulating the interaction between additives and SAMs in high‐performance perovskite photovoltaic devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI