材料科学
形态学(生物学)
腐蚀
冶金
曲面(拓扑)
复合材料
数学形态学
碳钢
表面处理
微观结构
作者
Biao Nie,Dongzhou Huang,Shanhua Xu,Wenqian Jing,Youde Wang,Wenjie Guo
标识
DOI:10.1016/j.cscm.2026.e06074
摘要
To accurately characterize and reconstruct the complex surface morphology of corroded cold-formed steel (CFS) members exposed to industrial environments, ten groups of CFS specimens that had been in service for approximately 10 years were scanned using an ST400 three-dimensional non-contact surface morphology measurement system, and three-dimensional morphology data of real corroded surfaces were obtained. Based on the measured data, key morphological parameters associated with general corrosion and pitting corrosion were extracted, including general corrosion depth, pitting depth, pitting diameter-to-depth ratio, and pitting volume ratio. Probabilistic statistical analyses were performed to investigate the evolution of corrosion surface morphology parameters with increasing corrosion rate. On this basis, a corrosion surface morphology reconstruction method was proposed by coupling the two-dimensional power spectral density (PSD) function with the multi-scale random pitting corrosion model. The results indicate that under industrial corrosive environments, pitting corrosion is dominant in the early and middle stages of corrosion of CFS members and represents one of the most important corrosion forms governing the evolution of surface morphology. The general corrosion depth of CFS follows a normal distribution, whereas both the pitting corrosion depth and the pitting diameter-to-depth ratio follow lognormal distributions. With increasing corrosion rate, the mean value and standard deviation of general corrosion depth increase continuously, the logarithmic mean of pitting corrosion depth gradually increases, while the logarithmic mean of the pitting diameter-to-depth ratio exhibits a decreasing trend, indicating that pitting corrosion morphology progressively evolves toward a hemispherical shape. The proposed corrosion surface morphology reconstruction method shows excellent agreement with real corroded surfaces in terms of multiple statistical indicators, including probability distributions and fractal dimension, thereby providing a more realistic and reliable basis for numerical modeling and mechanical performance analysis of corroded CFS members.
科研通智能强力驱动
Strongly Powered by AbleSci AI