材料科学
太阳能电池
工程物理
光电子学
纳米技术
物理
作者
Shou‐Yi Kuo,Jui‐Fu Yang,Kuo-Jen Lin,Fang‐I Lai
摘要
This study utilized a postdeposition sulfurization method to produce thin films of the Cu2SnSnS4 (CZTS) absorber layer. Initially, metal precursors were deposited onto a tin oxide‐coated substrate through thermal evaporation. Subsequently, sulfurization occurred in a mixed environment of sulfur vapor and argon gas. The sulfurization temperature was set at 500°C for a duration of 30 min. During the sulfurization process, the facile evaporation of tin compounds could lead to a deviation in the atomic ratio within the absorber layer and potentially result in the attachment of secondary phases to the surface of the absorber layer. Therefore, this study employed a multilayered metal precursor structure (with a constant total thickness for each metal and nonmetal sulfides as precursors) for sulfurization. This method effectively suppressed the formation of secondary phases, including ZnS within the absorber layer and SnS2 on the surface. From the quantification results, the ratio of ZnS to CZTS signal intensity decreased from 0.52 to 0, while the ratio of SnS2 to CZTS signal intensity dropped from 1.2 to 0. Additionally, the efficiency increased to 2.79%. In summary, this research introduced a novel preparation method to enhance the quality of CZTS films. The modification to a multilayered metal precursor structure reduced the evaporation of tin compounds, consequently minimizing the generation of secondary phases.
科研通智能强力驱动
Strongly Powered by AbleSci AI