锂(药物)
兴奋剂
离子
涂层
煅烧
材料科学
阴极
化学工程
电化学
电极
扩散
化学
纳米技术
光电子学
催化作用
有机化学
物理化学
物理
工程类
内分泌学
热力学
医学
作者
Wei Xiao,Jiale Wang,Zhicheng Yi,Chengjin Liu,Chang Miao,Yu Xin,Shuqing Nie
出处
期刊:Rare Metals
[Springer Science+Business Media]
日期:2024-04-22
卷期号:43 (7): 3007-3018
被引量:54
标识
DOI:10.1007/s12598-024-02692-y
摘要
Abstract Li 3 PO 4 @Li 0.99 K 0.01 Ni 0.83 Co 0.11 Mn 0.06 O 2 (NCM‐KP) cathode powders are synthesized via K + doping in calcination processes and H 3 PO 4 coating in sol–gel processes. K + precisely enters into the lattice to widen the (003) plane to 0.4746 nm with a lower cationic disordered degree of 1.87%. Moreover, the surface residual lithium salts are treated by H 3 PO 4 to generate a uniform Li 3 PO 4 coating layer of approximately 11.41 nm, which completely covers on the surface of secondary spherical particles to improve the interfacial stability. At 25 °C, the NCM‐KP electrode delivers a discharge specific capacity of 148.9 mAh·g −1 with a remarkable capacity retention ratio of 84.1% after 200 cycles at 1.0C and retains a high reversible specific capacity of 154.4 mAh·g −1 at 5.0C. Even at 1.0C and 60 °C, it can maintain a reversible discharge specific capacity of 114.6 mAh·g −1 with 0.21% of capacity decay per cycle after 200 cycles, which is significantly lower than 0.40% for the pristine NCM powders. Importantly, the charge transfer resistance of 238.89 Ω for the NCM‐KP electrode is significantly lower than 947.41 Ω for the pristine NCM one by restricting the interfacial side reactions. Therefore, combining K + doping and Li 3 PO 4 coating is an effective strategy to enable the significant improvement of the electrochemical property of high‐nickel cathode materials, which may be mainly attributed to the widened diffusion pathway and the formed Li 3 PO 4 protective layer, thus promoting Li + diffusion rate and preventing the erosion of HF.
科研通智能强力驱动
Strongly Powered by AbleSci AI