ABSTRACT Natural rubber (NR) has high strength and excellent processing performance, and cis‐polybutadiene rubber (BR) has excellent abrasion resistance and low temperature resistance, but both NR and BR are highly flammable and emit large amounts of smoke. Therefore, it is a challenge to improve the flame retardant and smoke suppression properties of NR and BR while maintaining their high mechanical properties. In this study, metal ion complexed boron phenolic resin (BPF) is used to coat aluminium diethyl hypophosphite (ADP) and adsorb with melamine (MF) to form a microencapsulated flame retardant (FeBADP/MF). The flame retardants are characterized by FTIR, XPS, SEM, EDS, and TGA. The microencapsulated flame retardants are added to NR/BR composites. The results show that the LOI of NR/BR composites with 15 phr of FeBADP/MF is increased from 23.1% to 24.2%, and the maximum smoke density is reduced by 35.1% compared with ADP; and the LOI of NR/BR composites is 27.2% with FeBADP/MF added in the amount of 20 phr. The NR/BR composites were characterized by residual carbon and TG‐FTIR studies to analyze the flame retardant mechanism of FeBADP/MF. It is also found that the addition of FeBADP/MF to NR/BR improves the vulcanization properties of the composites and enhances the mechanical properties of the composites. This study tries to solve the problem of the decreased mechanical properties of NR/BR composites during the improvement of flame retardant and smoke suppression properties, and to provide an important theoretical and experimental basis for the development of high‐performance flame retardant rubber materials.