The Construction of a Lattice Image and Dislocation Analysis in High-Resolution Characterizations Based on Diffraction Extinctions

This paper introduces a method for high-resolution lattice image reconstruction and dislocation analysis based on diffraction extinction. The approach primarily involves locating extinction spots in the Fourier transform spectrum (reciprocal space) and constructing corresponding diffraction wave functions. By the coherent combination of diffraction and transmission waves, the lattice image of the extinction planes is reconstructed. This lattice image is then used for dislocation localization, enabling the observation and analysis of crystal planes that exhibit electron diffraction extinction effects and atomic jump arrangements during high-resolution transmission electron microscopy (HRTEM) characterization. Furthermore, due to the method’s effectiveness in localizing dislocations, it offers a unique advantage when analyzing high-resolution images with relatively poor quality. The feasibility of this method is theoretically demonstrated in this paper. Additionally, the method was successfully applied to observed edge dislocations, such as 1/6[211−], 1/6[2−11−], and 1/2[01−1], which are not easily observable in conventional HRTEM characterization processes, in electro-deposited Cu thin films. The Burgers vectors were determined. Moreover, this paper also attempted to observe screw dislocations that are challenging to observe in high-resolution transmission electron microscopy. By shifting a pair of diffraction extinction spots and superimposing the reconstructed images before and after the shift, screw dislocations with a Burgers vector of 1/2[011−] were successfully observed in electro-deposited Cu thin films.